Learn what the common ion effect is, how to make equilibrium calculations involving it, and how to find the concentrations of ions when adding reactions in equilibrium to solutions that already contain ions.
Common Ion Effect
The common ion effect is the phenomenon in which the addition of an ion common to two solutes causes precipitation or reduces ionization. You know Le Chatelier’s principle, which states that a reaction stays in equilibrium unless acted on by an outside force; then the reaction will shift to accommodate the force and re-establish equilibrium.
This means that if you want a reaction to shift, you just apply an outside force, such as temperature, concentration or pressure. In the case of the common ion effect, a reaction can be shifted by adding an ion that is common to both solutes, thus changing the concentration of the ion in solution and shifting the equilibrium of the reaction. The net effect of the common ion is that it reduces the solubility of the solute in the solution. The common ion effect can make insoluble substances more insoluble.
An example of the common ion effect is when sodium chloride (NaCl) is added to a solution of HCl and water. The hydrochloric acid and water are in equilibrium, with the products being H3O+ and Cl- . Then, some sodium chloride is added to the solution.
- HCl + H2O –> H3O+ + Cl-
- NaCl makes Na+ + Cl-
The NaCl dissolves into the solution, forming Na+ and Cl-. As the NaCl dissolves, the concentration of Cl- ions increases.
The system accommodates by combining the Na+ and Cl- back into NaCl, which is a solid and precipitates out of the solution. In effect, more of the Cl- ions, which are common to both of the reactions, were added to the solution in equilibrium, so the equilibrium shifted back to the left.What would happen to the solubility of a saturated solution of MgCO3 if you added K2CO3?
- MgCO3 makes Mg2+ + CO32-
- K2CO3 makes 2K+ + CO32-
So, by adding the K2CO3, the concentration of CO32- ions increases, which causes the reaction equilibrium to shift to the left, which makes more MgCO3, and the solubility decreases.
Let’s look at an example.
If AgCl is dissolved in a solution that already has a Cl- ion concentration of 0.05 M, what happens to the solubility of AgCl? The Ksp of AgCl is 1.8 * 10^-10. Let’s start with the equations:
- AgCl makes Ag+ + Cl-
- Ksp (the solubility constant) = Ag+ * Cl-
Since there are equal moles of Ag+ and Cl- in the solution, we know that their concentration is the same, and we can let x denote their concentration.For the Cl- concentration, the dissolving of AgCl adds more Cl- to the amount of Cl- already present in the solution, which is 0.05 M. The whole equation becomes 1.
8 * 10^-10 = x * x + 0.05.This simplifies to 1.8 * 10^-10 = x^2 + 0.05x, which is a quadratic equation. Luckily for us, we don’t need to solve it. x is going to be a very small number, so when added to 0.
05, it won’t be significant. Therefore, it won’t be a significant error if we don’t account for it. When it comes to Ksp, the values are fairly inexact anyway, so the little error introduced by leaving out x won’t matter too much. The new equation becomes 1.8 * 10^-10 = x * 0.05.
x = 3.6 * 10^-9; this means that the concentration of Ag+ and Cl- are 3.6 x 10^-9.Now we need to know what the concentration of those ions was before they were added to the solution. Ksp = Ag+ * Cl-. Again, allow x to equal both Ag+ and Cl-.
77 * 10^-10 = x^2
x = 1.3 * 10^-5So, as you can see, the new concentrations of Cl- are much less than the old one. 3.6 * 10^-9 < 1.3 * 10^-5. Where did all of those Cl- ions go? They were made back into AgCl.
A precipitate forms when a substance is insoluble in water. So, it makes sense that if you make something even more insoluble by adding a common ion, a precipitate will form.
This was shown in the above problem we just did. We added AgCl- to a solution that already had Cl- ions in it. After doing all of the math, we found that the concentration of Cl- ions decreased, and the equilibrium equation shifted to the left. If the equilibrium equation shifts to the left when adding common ions, then a precipitate will form.
This is because more of the solid is being made and must come out of solution.
The common ion effect is the phenomenon in which the addition of an ion common to two solutes causes precipitation or reduces ionization. When an ion that is common to both the solutes is added to the reaction in equilibrium, that reaction will shift in a way to decrease the concentration of that ion, usually by shifting left and making a solid that precipitates out of the solution. The net effect of the common ion is that it reduces the solubility of the solute in the solution.
The ion effect can make insoluble substances more insoluble.
Following this lesson, you could be able to:
- Remember what the common ion effect is
- Using a solubility constant, determine what will happen to the solubility of a substance given a particular ion concentration
- Predict when a precipitate will form in a solution