Site Loader
Rock Street, San Francisco

Step 6 was repeated on each CACM point, CACM point and CACM point 8. Step 4-6 were repeated twice more 9. First, the experiment was set-up as shown in figure 1 10. Then, measured CACM with the meter ruler to make a point and placed some blue-tact on it 11. Also repeated the points for distance of CACM, CACM and CACM 12. Then the ball was placed at the starting point 13. After that, the ball was released while the stopwatch was pressed to start 14. When the ball was arrived to the CACM point, stopped the stopwatch and recorded the time 15. Step 6 was repeated on each CACM point, CACM point and CACM point 16.

Step 4-6 were repeated twice more 17. First, the experiment was set-up as shown in figure 1 18. Then, measured CACM with the meter ruler to make a point and placed some blue-tact on it 19. Also repeated the points for distance of CACM, CACM and CACM 20. Then the ball was placed at the starting point 21. After that, the ball was released while the stopwatch was pressed to start 22. When the ball was arrived to the CACM point, stopped the stopwatch and recorded the time 23. Step 6 was repeated on each CACM point, CACM point and CACM point 24. Step 4-6 were repeated twice more 25.

First, the experiment was set-up as shown in figure 1 26. Then, measured CACM with the meter ruler to make a point and placed some blue-tact on it 27. Also repeated the points for distance of CACM, CACM and 1 Com 28. Then the ball was placed at the starting point 29. After that, the ball was released while the stopwatch was pressed to start 30. When the ball was arrived to the CACM point, stopped the stopwatch and recorded the time 31. Step 6 was repeated on each CACM point, CACM point and CACM point 32. Step 4-6 were repeated twice more 33.

First, the experiment was set-up as shown in figure 1 4 Then, measured CACM with the meter ruler to make a point and placed some blue-tact on it 35. Also repeated the points for distance of CACM, CACM and CACM 36. Then the ball was placed at the starting point 37. After that, the ball was released while the stopwatch was pressed to start 38. When the ball was arrived to the CACM point, stopped the stopwatch and recorded the time 39. Step 6 was repeated on each CACM point, CACM point and CACM point 40. Step 4-6 were repeated twice more 41. First, the experiment was set-up as shown in figure 1 42.

Then, measured CACM with the meter ruler to make a point and placed some lee-tact on it 43. Also repeated the points for distance of CACM, CACM and 1 Com 44. Then the ball was placed at the starting point 45. After that, the ball was released while the stopwatch was pressed to start 46. When the ball was arrived to the CACM point, stopped the stopwatch and recorded the time 47. Step 6 was repeated on each CACM point, CACM point and CACM point 48. Step 4-6 were repeated twice more 49. First, the experiment was set-up as shown in figure 1 50. Then, measured CACM with the meter ruler to make a point and placed some blue-tact on it 51 .

Also repeated the points for distance of CACM, CACM and CACM 52. Then the ball was placed at the starting point 53. After that, the ball was released while the stopwatch was pressed to start 54. When the ball was arrived to the CACM point, stopped the stopwatch and recorded the time 55. Step 6 was repeated on each CACM point, CACM point and CACM point 56. Step 4-6 were repeated twice more 57. First, the experiment was set-up as shown in figure 1 58. Then, measured CACM with the meter ruler to make a point and placed some blue-tact on it 59. Also repeated the points for distance of CACM, CACM and CACM 0.

Then the ball was placed at the starting point 61. After that, the ball was released while the stopwatch was pressed to start 62. When the ball was arrived to the CACM point, stopped the stopwatch and recorded the time 63. Step 6 was repeated on each CACM point, CACM point and CACM point 64. Step 4-6 were repeated twice more 65. First, the experiment was set-up as shown in figure 1 66. Then, measured CACM with the meter ruler to make a point and placed some blue-tact on it 67. Also repeated the points for distance of CACM, CACM and 1 Com 68. Then the ball was placed at the starting point 69.

After that, the ball was released while the stopwatch was pressed to start 70. When the ball was arrived to the CACM point, stopped the stopwatch and recorded the time 71. Step 6 was repeated on each CACM point, CACM point and CACM point 72. Step 4-6 were repeated twice more 73. First, the experiment was set-up as shown in figure 1 74. Then, measured CACM with the meter ruler to make a point and placed some blue-tact on it 75. Also repeated the points for distance of CACM, CACM and 1 Com 76. Then the ball was placed at the starting point 77. After that, the ball was released while the stopwatch was pressed to start 8.

When the ball was arrived to the CACM point, stopped the stopwatch and recorded the time 79. Step 6 was repeated on each CACM point, CACM point and CACM point 80. Step 4-6 were repeated twice more 81. First, the experiment was set-up as shown in figure 1 82. Then, measured CACM with the meter ruler to make a point and placed some blue-tact on it 83. Also repeated the points for distance of CACM, CACM and CACM 84. Then the ball was placed at the starting point 85. After that, the ball was released while the stopwatch was pressed to start 86. When the ball was arrived to the CACM point, stopped the stopwatch and corded the time 87.

Step 6 was repeated on each CACM point, CACM point and CACM point 88. Step 4-6 were repeated twice more 89. First, the experiment was set-up as shown in figure 1 90. Then, measured CACM with the meter ruler to make a point and placed some blue-tact on it 91 . Also repeated the points for distance of CACM, CACM and CACM 92. Then the ball was placed at the starting point 93. After that, the ball was released while the stopwatch was pressed to start 94. When the ball was arrived to the CACM point, stopped the stopwatch and recorded the time 95. Step 6 was repeated on each CACM point, CACM point and CACM point 96.

Step 4-6 were repeated twice more 97. First, the experiment was set-up as shown in figure 1 98. Then, measured CACM with the meter ruler to make a point and placed some blue-tact on it 99. Also repeated the points for distance of CACM, CACM and 1 Com 100. Then the ball was placed at the starting point 101. After that, the ball was released while the stopwatch was pressed to start 102. When the ball was arrived to the CACM point, stopped the stopwatch and recorded the time 103. Step 6 was repeated on each CACM point, CACM point and CACM point 104.

Step 4-6 were repeated twice more 105. First, the experiment was set-up as shown in figure 1 106. Then, measured CACM with the meter ruler to make a point and placed some blue-tact on it 107. Also repeated the points for distance of CACM, CACM and CACM 108. Then the ball was placed at the starting point 109. After that, the ball was released while the stopwatch was pressed to start 110. When the ball was arrived to the CACM point, stopped the stopwatch and recorded the time 111.

Post Author: admin

Leave a Reply

Your email address will not be published. Required fields are marked *