Site Loader
Rock Street, San Francisco

Using Show Commands to Investigate Network Status Lab (15 points) Write a paragraph (minimum five college-level sentences) below that summarizes what was accomplished in this lab, what you learned by performing it, how it relates to this week’s Twos and other course material, and just as important, how you feel it will benefit you in your academic and professional career. (3 points) In this lab I was able to accomplish by using the show commands I learned how to investigate the network status. Not only will the benefit my professional career UT it will also help me in the course on how to trouble shoot and learn the basics.

Copy and paste the following corrections from your Using Show Commands to Investigate Network Status lab. Task 1, Step 2: Paste a corrections showing the output of the show version command. Remember that when you see the word more at the bottom of the screen it means that you will need to see additional output. Press the space bar until you are back to the user mode prompt. You will need to take at least two corrections in order to have the complete output. (1 point) Question: What is the name of the ISO file being used by this device? Which memory system is used to store this file?

Ciscoes/k *Hint* Read and study the explanations within the lab for assistance. (2 points) Task 1, Step 6: Paste a corrections showing the output of the IP route command. (1 point) Question: What network(s) were learned by a dynamic routing protocol? Which dynamic routing protocol is being used by this router? The RIP protocol is being used to learn 100. 0. 0. 0/8 via Exhibitioner’s/0. Task 1, Step 10: Several of these router operations have been used in past experiments. However, you probably haven’t been exposed to many WAN protocols.

A very popular WAN protocol is frame relay. Paste a corrections showing mappings of the active Delis to the remote router’s IP address. (1 point) Question: What is the address of the remote router interface? 172. 41. 1. 5 Task 1, Step 11: Paste a corrections showing the neighboring devices to ANYWAY . Question: What are the device IDs of the neighboring device? Which router interface is connected to the switch? *Hint* Read and study the explanations within the lab for assistance. (2 points) ENCORED is the devices ID and its unconnected through Gig/O.

Performing Switch Startup and Initial Configuration Lab Grading Rubric Category Section 2 Performing Switch Startup and Initial Configuration: 15 Points Task 1: Step 2 Task 1: step 16 Task 1: step 21 Task 1: step 24 In your own words, summarize what you have learned about switch startup and initial configuration. Performing Switch Startup and Initial Configuration Lab (15 points) Write a short was accomplished in this lab, what you learned by performing it, how it relates to this week’s Twos and other course material, and just as important, how you feel t will benefit you in your academic and professional career. 3 points) In this lab was able to clear and configure a switch from scratch. This will be very helpful when receiving a used switch from someone, or if I just want to start from the beginning on a switch. This is vital when working professionally with switches. For the Performing Switch Startup and Initial Configuration lab, you must post your completed lab corrections to earn points. A missing or incorrect corrections earns 0 points. Task 1, Step 2: Paste a corrections after your execute the erase startup-confining nomad but before you execute the reload.

NOTE: Be sure to take the corrections before you reload or you will have to repeat this step in order to obtain the correct results. (1 point) Question: What is the effect of erasing the startup-confining file? By erasing it and entering the reload command, you will be able to configure the switch from scratch. *Hint* Read and study the explanations within the lab for assistance. (2 points) Task 1, Step 16: Paste a corrections of the script that was created during the lab. (1 point) Question: In your own words and without listing the parameters that were inferred in the script, what is the overall purpose of creating the startup script?

The purpose of creating the startup script is to have the building blocks to a professional switch in the making. Task 1, Step 21: Paste a corrections showing that passwords have been set. Repeatedly press the space bar until you have scrolled all the way through the running-confining and have returned to the prompt. Notice that the commands that you entered to establish passwords for the various modes of access are now password protected and that you can read the passwords. (1 point) Question: Which modes of access are now password protected?

Line VT O through 15 now have a password of Cisco. Task 1, Step 24: Paste a corrections after you have executed the show run command. Repeatedly press the space bar until you have scrolled all the way through the running-confining and have returned to the prompt. Perform a screen capture. Notice that the passwords that were in clear text (readable) in Step 21 are now scrambled (encrypted). (1 point) Question: What command caused the clear text passwords to be encrypted? The password-encryption command caused the clear text passwords to be encrypted.

Post Author: admin

Leave a Reply

Your email address will not be published. Required fields are marked *