Paste a screens showing port security that you enabled on switch ENCORED. (1 point) Question: According to the security output, What action Will be taken by the switch in the event that it detects the attachment of an unauthorized device? Task 1, Step 26: Paste a screens showing the successful ping of the ENGAGED Lubbock. (1 point) Question: Which network can be accessed by two paths? Why? Managing Remote Access Sessions Lab Grading Rubric Category Points Description Section 2Managing Remote Access Sessions: 15 points Task 1: Steps 5 and 6 Related Explanation or Response Task 1: step 14 Task 1: step 19 Additional Related Response Summary Paragraph Paste the requested screens.
Provide the requested answer, paste the requested screens. Provide the requested answer. In your own words, summarize what you have learned about managing remote access sessions. NOTE: Please write your answers to each question in a different color font to make this easier for the Professor to grade.Managing Remote Access Sessions Lab (15 points) hat was accomplished in this lab, what you learned by performing it, how it you feel it will benefit you in your academic and professional career, (3 points) Copy and paste the following corrections from your Managing Remote Access Sessions lab below.
Task I, Step S and 6: paste a screens showing the commands that you entered into router ENGAGED configuring the command and history buffers. (l point) Question: What operation must be performed in order for the history size of 100 to be available to all users?Task 1, Step 14: Paste a screens showing your successful telnet into muter WEDGED. (1 point) Question: What steps have to be performed on a router or switch in order to allow remote access? Task 1, Step 19: Paste a screens showing your currently active telnet sessions, (1 point) Question: What is the significance of the asterisk next to the connection number? *Hint* Read and study the explanations within the lab for assistance. (2 point) Question: What is the key stroke sequence used to suspend a telnet session? Read and study the explanations within the lab for assistance.
Point) Question: To view your active remote connections, you issue the show connections command. Once you have identified an existing connection to which you would like to reconnect, What command would you issue? *Hint* Read and study the explanations Within the lab for assistance. (I point) Question: TO view your active remote connections, you issue the show connections command. Once you have identified existing connections, what command would you issue to terminate a specific connection? *Hint* Read and study the explanations within the lab for assistance.