Rock Street, San Francisco

Determination the velocity & discharge using floatsAPPARATUS:1)    TapeMeasure2)    Stop-Watchcell phone having a timer3)     Meter stick TO Measure Depth (Tape Measuresare more Difficult to use)4)    Buoyantobjects such as orange  THEORY:If a Flow Meter is not Available or RoughEstimate is enough so we can use the float to measure the flow. The float canbe any light object such as pine cone or an orange or partially filled plasticwater bottle.The basic idea is to Measure the time that ittakes a floating object to travel a specified distance downstream. We measurethe flow of stream. Flow is important because define the shape, size anddirection of the stream.

Measure the distance up to 50 feet along thebank string the rope at the both ends.1.     Usingthe total stream calculate the cross sectional area of the stream at the bothend. To find the total stream width and the average depth.

### Best services for writing your paper according to Trustpilot

From \$18.00 per page
4,8 / 5
4,80
Writers Experience
4,80
Delivery
4,90
Support
4,70
Price
Recommended Service
From \$13.90 per page
4,6 / 5
4,70
Writers Experience
4,70
Delivery
4,60
Support
4,60
Price
From \$20.00 per page
4,5 / 5
4,80
Writers Experience
4,50
Delivery
4,40
Support
4,10
Price
* All Partners were chosen among 50+ writing services by our Customer Satisfaction Team

Total Width (feet)*Average depth (feet) = area in feet.2.     ThrowThe Float From Upstream Direction. Get a stop watch to record the time it takesto reach the downstream. If the float moves too fast so record the data 75 or100 instead of 50 feet.

Repeat this process two more times for a total of threemeasurements.3.     Nowin this step we will calculate the velocity the distance covered by floatdivided by the average amount of time it took to covered the distance.  If the distance is 50 feet and the time takenby orange 100 seconds so get the velocity is 0.5 feet/sec.          50 feet/100sec=0.5sec.

4.     Calculatethe mid-depth velocity by multiplying the surface velocity by 0.85.          0.

5×0.85=0.43ft/sec.

5.  Now calculate the discharge incubic feet per second (cfs) & multiplying the          Velocity (ft/sec) by the cross-sectional area (ft) of the stream.         0.43ft/secx10.

73ft=4.62cfs.                                         USING A STAFF GUAGE The staff gage is a long ruler placedsemi-permanently in a stream or lake used to measure the water depth. Streamguage are the most common & useful measure and therefore emphasized here.We can also place the staff guage in a lake to monitor changes in lake waterlevel.

If a staff guage place on non-vertical place so knowing that the staffguage reading is correct or not.                           WHY USE ASTAFF GUAGEWe can use a staff guage to get the informationin an indirect way to calculate the stream flow. If we place the staff guagenear a section of stream for which you are collecting flow data, you canidentify the relationship between stream depth & stream flow.

Once you gotthis relationship so we can calculate flow from the stream depth without havingto take a time to make a detailed flow measurement. A staff guage havingnumerically labeled divided in lines to take the measurement of water &calculate easily the depth & stream flow.

### Post Author: admin

x

Hi!
I'm Eric!

Would you like to get a custom essay? How about receiving a customized one?

Check it out