AbstractPower utilization is the significant worry in almost in all frameworks right now from the tremendous data centers to versatile gadgets.Effective power supervision is progressively fundamental to designers working in a wide variety of application domains.In the vast majority of the associations today the power is squandered unnecessarily.
This issue can be lessened by utilizing RFID innovation. This paper portrays how RFID innovation can be used for power saving system in colleges and associations, here RFID reader takes the input from the client and the gives the required yield which is utilized to spare the power consumption.The message is sent to the association at whatever point electric apparatuses are working unnecessarily.So, that the association makes required a move by turning off the electrical appliances1. Introduction This paper presents a method and an implementation technique for the management of AC appliances using RFID technology and Node MCU as major Hardware Components.Radio frequency identification (RFID) refers to the use of radio frequency wave to identify and track the tag implanted into an object or a living thing. It is a wireless mean of communication that use electromagnetic and electrostatic coupling in radio frequency portion of the spectrum to communicate between reader and tag through a variety of modulation and encoding scheme. Modulation refers to the variation in the amplitude, frequency or phase of a high-frequency carrier signal to convey information.
Encoding is a process of converting information from one format to another. RFID system usually consists of RFID reader and tag. It is very useful because it can uniquely identify a person or a product based on the tag incorporated. It can be done quickly and this usually takes less than a second.A paradigm of the system has been designed and fabricated. The RFID reader used in the system is the passive type which has a maximum range of detection of around 5cm above the reader.
It operates at a frequency of 125 kHz and 12V power supply. The system has the ability to send the message or mail to the specific person informing in regards to the functioning AC appliances unessential when the tag is swiped. The users only need to place their RFID tag on the reader to send the data. The information sent to the specific individual using Node MCU device as the basis which has the module ESP8266 unified to keep up a correspondence with the Internet. The output data then uploaded to the google server and after which the data is transmitted via mail which uses PHP script language and the message is sent to mobile via third party server Way2sms.The rest of the paper explains as below: Section I tells the related work for internet device services RFID, Section III; Explains the RFID framework, Section IV; provides results and discussions and finally Section V; draws some conclusions.2.
Related work for RFID 2.1 RFID Reader: Most RFID systems include tags that are attached to the objects to be identified. Each tag has its own “read-only” or “rewrite” internal memory depending on the type and application. The typical structure of this memory is to store output information, corresponding to an object’s unique ID, manufactured date, etc. The RFID reader generates magnetic fields which enable the RFID system to locate targets (via the tags) which are within its range.
The high-frequency electromagnetic energy and query signal generated by the reader triggers the tags to respond to the query; the query frequency could be up to 50 times per second. As a result communication between the main components of the system i.e., tags and reader is maintained. As a result, massive quantities of data arise. Supply chain industries control this complication through the use of filters which are routed to the backend information systems.
Tags consist of microchips which store the unique identification (ID) of each object. The ID is a serial number stored in the RFID memory. The chip is made up of the integrated circuit and embedded in a silicon chip. RFID memory chip can be permanent or changeable depending on the read/write characteristics. Read-only and rewrite circuits are different as read-only tag consist of fixed data and can not be changed without re-program electronically. On the other hand, re-write tags can be programmed through the reader at any time without any limit. RFID tags can be different sizes and depend on the application and the environment in which it will be used. A variety of materials are integrated on these tags.
RFID reader works as a significant place for the RFID system. It reads tags data through the RFID antennas at a certain frequency.Basically, the reader is an electronic apparatus which produce and accept radio signals. The antennas contain an attached reader, the reader translates the tags radio signals through an antenna, depending on the tags capacity. The readers include built-in anti-collision schemes and a single reader can operate on multiple frequencies. As a result, these readers are likely to assemble or write data onto tag (in case) and pass to computer systems. For this purpose, readers can be connected using RS-232, RS-485, USB cable as a wired options (called serial readers) and connect to the computer system.
Also can use WiFi as wireless options which also known as network readers. Readers are electronic devices which can be used as standalone or be integrated with other devices and a few components/hardware into it.2.2 Node Microcontroller Unit ( MCU)NodeMCU device as the basis which has the module ESP8266 integrated to communicate with the Internet and has a very cheap price and which provides little power supplied as processors and this chip is considered as the future of IoT. Fig: 1 Methodology used for RFID Reader to Node MCU NODE MCU has a very economical price and which provides little power supplied as processors, and this chip is considered as the future of IoT.Node MCU including wifi module ESP8266.Here Node MCU takes the data from RFID reader and sends it to the google server about the electric appliances that are in usage unnecessarily when the tag is swiped against the reader.2.
3 google serverGoogle’s Gmail SMTP server is a free SMTP service which anyone who has a Gmail account can use to send emails.We can use it with personal emails, or even with your website if you are sending emails for things such as contact forms, newsletter blasts, or notifications.Here in this paper google server send the email to the organization which uses PHP language and a message is sent to the mobile using third party server way2sms.3. Design of Device service model Service registryService requesterService providerFind UDDIpublish WSDLUDDIExecute SOAPThe device service is an attention-grabbing, robust and most popular technology on the earth for the development of device-based applications. It ought to be a secured in a business environment with remote login. To gain the acknowledgment by the programmer or developer it can be located and invoked over a network with RFID device security algorithms.
The RFID tiny encryption algorithms are a sprint for numerous platforms. In this methodology, the device program is written in python and encrypted tokens are generated in RFID system.This technology is similar to remote login authentication and simulated by the wireless sensor networks, unique registry identifier, and SOA protocol. The process consists of three segments, hunting (discovery), tying and finishing. The Device Service Model is shown in the Fig. 1Fig: 2 Device Service modelSOAP: Simple object access protocol is a message path and flows from the dispatcher to the receiver, consisting of envelope, Body, and Header.WSDL: Device services description language (WSDL) used to describe the well-designed model of the services.
UDDI: Universal Description Discovery and Integration used as a record for the device Services. 4. Proposed methodology:The proposed methodology on this spot will be the information regarding regulation of AC appliances which are avoidably in use is transmitted to the google server with the use of NODEMCU every time the RFID tag is swiped across the RFID reader.
This information is composed of whereabouts of functioning AC appliances avoidably. Once the google server receives the information it is sent to the control room via mail and the desired individual within the organization telling him about the particular room in which electric appliances are running via mobile message.And after which the organization will off the respective AC appliances that are avoidably in use.
Fig: 3 RFID Reader to Node MCU Communication on Cloud The data regarding the control room and the mobile numbers of the desired persons are stored in Google server database. When the tag is swiped once across the reader it will remain inactive for succeeding ten minutes expecting the organization to perform an action, i.e even if another tag is swiped again across the same reader less than ten minutes the server will not caution the organization. Once the ten minutes are up until the reader again accepts the card that is swiped at it and caution the organization.4.1.
Flow Chart Fig: 4 The Process Flow for the proposed module As shown in Fig 4, and the following steps are involved in this process 4.1.1 Algorithm Steps1. RFID user swipe the RFID tag (sends credentials toNODEMCU hardware) 2 The Corresponding classroom electricity information (Tag) will be sent to Google server via Node MCU.
3. Then Google server sends the information to Control that unnecessarily functioning electric appliances.4. Google server also sends the data to another third party server Way2sms.5.Way2SMS then send the information to the organization through a mobile message.
6. The five minutes are allocated for swapping between two RFID cards with the same reader. 7.
If card is swiped below five minutes the information is not sent to Google server (card is rejected) That information will send to the cloud server via internet using simple Mail Transfer Mail Protocol (SMTP) with the following Internet Address (IPP) as The MCU module Foundation has been admirable by the web tools and web message protocols such as MQTT and SMTP.The SQL dB and PHP web programming language such as Arduino are used to send the message as shown in fig 7.When multiple tags are excited or swiped by the RFID users, reader in the range of radio frequency within five minutes, the post to URL might not work consistently. To reduce ambiguity thoughts between the consequence tags the Ethernet Shield, Real-time Clock module is used among the RFID reader. The swapping time among the tags are overlapped with the RFID system, the cards are rejected as shown in fig 8 and Fig 9